Towel rack is hanging towels, towels, the main use of t […]
Towel rack is hanging towels, towels, the main use of the bathroom. Can also be used for beautiful decoration, such as placing flower pots, piled up debris and so on. Some towel racks also have heating, drying, disinfection, inhibition of bacterial growth and other functions.
1, depending on the nature of the material,
2, is the surface processing technology.
The following describes several kinds of towel rack material:
1, compared to the nature of stainless steel is not easy to rust (in fact, rust is an oxidation process) features to ensure its stability, it is also commonly used, "stainless steel" only direct surface polishing or drawing, no separate Change the surface material, or additional coating, but according to the different grades, there are some differences in stability, daily called 304 than 201 is better. Surface polished, the material is good, good processing technology can reach the mirror, but worse than the copper plating to be worse.
2, "copper" brass basic use of the class, and chrome plating on the surface, handled well, can reach the mirror, with copper nature of the price, there will be noble feeling, if not plating, the surface is very easy to produce green, Can not be used, so the plating layer is much more reliable than a layer of "paint" on the iron surface, but it depends on the electroplating process, otherwise the green patina will not appear on the surface for several years. As the commonly used sanitary ware products, "stainless steel" material prices much lower than the copper material, some manufacturers based on the proportion of stainless steel and copper, the magnet can not afford to absorb the characteristics of the stainless steel plating after the counterfeit is said to be "copper" material Well, although the cost of stainless steel plating is not cheap, but generally cheaper.
3, on the "aluminum", due to "pure aluminum" less than the use of steel strength and the surface can not be easily oxidized can not be used, the general use of rust-proof aluminum or dull aluminum group, but unlikely Is the so-called and aerospace equipment in the same aluminum alloy material, "aluminum" material after the surface oxygen anodized surface than without the surface treatment to be much more stable, there are a variety of surface treatment processing results, mainly two Species: A surface looks brighter, one is the surface looks similar matte, although the former surface layer is thin but harder, not easy to scratch. The latter kind of surface is like adding a layer of coating layer, though it is thick but it will be prone to scratches. The latter kind of surface can be processed into a variety of colors, and the aesthetics should be better.
4, "iron", due to easy rusting must be surface treatment, galvanized chrome or painting, compared to "iron" above the plating layer without "copper" above the coating to be reliable. Using the paint process, the paint is also easy to scratch, peeling off. But you can have a variety of colors to do more beautiful, paint well handled life is not short, such as automotive sheet metal paint, good for more than 10 years there is no big problem.
5, "plastic", in terms of steel strength, although the life expectancy than the above metal materials to be less, but the engineering plastics in the car above the application of many facts, so that the reliability of the basic to meet the requirements, the plastic Machinable into a variety of colors, structure, price cheaper features, I think temporary use, not long-term use to consider the user is a good choice.